德国Huber     
Peter Huber Kältemaschinenbau 公司是由Peter Huber先生在1968年创立的最有实力的制冷设备制造企业， 于1984年成为有限责任公司，公司的所有权归Huber家族所有。Huber公司目前拥有220 多名职员， 其中有8 名制冷技术专家。现在有12万台Huber公司生产的控温设备在全球运转，产品广泛应用于化工 、制药及实验室等技术领域。

自公司成立以来，Huber以其技术的独特创新成为控温技术的市场领导者。1989年Huber推出了全新的高动态的控温系统Unistat系列， 2010年 Huber公司再次荣获德国创新百强企业奖，成为德国最具创新的百强中型企业之一。
　Huber公始建于1968年。
　　Huber公司有33年生产制冷设备的经验，22年生产应用plug &play技术的控制器，11年的生产umistat系列产品的经验。
　　Huber公司的公司理念是不断培训新工程师，技工和艺工。
　　Huber公司的的各个部门都非常重视内部员工的培训。
　　从1968年起，Huber公司负责培训了60个以上的制冷技术人员，如果计算电子工程师，CAD操作者和办公室人员，培训的人员远远多于60个。
　　现在有5万台Huber设备在全球运转，70%的产品出口。
　　1986Huber为德国Heidolph公司设计的旋转蒸发仪专用L型冷却循环器“Kotostat”获得“Dr-Kudocf-Eberle-”奖。
　　1992年Huber推出“unistat和Tango”系列新技术；而Unistat系列产品很快成为工业行业的市场领导者。
发明创新回顾
　　1976年，Huber的先驱者体积小和功能强大的控温设备，ministat和unistatcc问世。
　　1979年，把pluy&play”技术和不锈钢壳体引入控制器最大化的灵活，高效。
　　1981年，首次生产出“intelligent chillet”。
　　1986年，生产出旋转蒸发仅专用L型冷却循环器，Kotostat获“Kudolf Ebetle”发明奖。
　　1991年，首次使用无-CFC的制冷剂。
　　1992年，unistat tango问世，全封闭的液体循环系统，内循环体积小，高效的温度响应。
　　1994年，首先使用无HCFC制冷剂，比法定的时间提前6年。
　　1994年，Compatible Control CCC系列问世，扩展了“plug和play”的技术。
　　1994年，首次生产出世界上第一台气冷和水冷型循环油浴CC245，夏天用水冷，冬天用气冷。
　　1998年，Polystats 新的比较简单的Polystats系列产品投放市场。
　　2000年，Dus-tnetm 唯一的一种为unistat系列产品的导热油DW-tnerm问世，温度范围为—90℃200℃。
　　2001年， unistatCC400 可以到400的高温循环油浴产生。
　　2002年，Unichillers问世，体积小，功率大，制冷功率可以从0.6KW到100KW。
　　2003年，生产“coolnet”分档次电动机控制膨胀阀。
　　2003年，将应用“pluy&play”技术的polystat系列的控制器应用于Huber的除unistat之外的所有仪器。

Peter Huber Kältemaschinenbau, was established in 1968 by Peter Huber. Since 1984 it has been a limited company and is completely owned by the Huber Family.

Peter Huber had several reasons to celebrate during his jubilee year in 2001:

33 Years of Huber Refrigeration Machines

22 Years of controllers featuring "Plug & Play" Technology

11 Years of Unistats featuring Tango Technology

Training the next generation of engineers, technicians and craftsmen has always been a priority to the Huber company. A training program active in all departments of the factory boasts 24 indentured apprentices in several trades.

Starting in 1968, Peter Huber can state with pride that his company has been responsible for training over 60 refrigeration technicians through this program. This figure increases when we count electricians, CAD operators and office staff.

Today more than 60,000 Huber systems are in operation worldwide. 70% of our sales went to the export market.

In 1986 the company received the Dr.-Rudolf-Eberle-Award for the "Rotostat". Please use this link to read about the Rotostat and why Huber was honoured with this award.

1992 saw the launch of the Unistat and Tango Technology. The Unistat range has grown to dominate our industry and remains un-equalled. Please use this link to read more about it.

Every company has it's landmarks. Products and innovations that set it apart from their competitors. Some of these are listed below, others will follow as our engineers continue to react to the demands of the market place and the constraints of new regulations.

Please note that we use the word "First" only if we are sure that we were. If you know differently, please tell us and we will retract the claim.

Key innovations at a glance:

1976 Ministat and the Unistat cc set a Huber precedent for small and powerful thermostats.
1979 The introduction of stainless steel casing and "Plug & Play" Technology introduced into the controllers. Maximum flexibility, minimum effort!
1981 First automatic load matching re-circulating chillers "Intelligent Chillers".
1985 Rotostat working platform for rotary evaporators wins the "Rudolf Eberle" Innovation Award.
1991 First to convert to non-CFC refrigerants
1992 Unistat Tango launched. First and still only hydraulically sealed circulator with low internal volume for highly responsive dynamic control.
1994 First to convert to non-HCFC refrigerants, 6 years before the legal phase out.
1994 Compatible Control (CC) Extension of the "Plug & Play" concept.
1994 First air and water cooled bath circulator in the world, CC245. Water-cooled in the summer and air-cooled in the winter.
1998 Polystats New range of simple units for low demand applications with "Plug & Play" Technology.
2000 DW-Therm unique thermal fluid for Unistats. Temperature range of -90°C to 200°C
2001 Unistat CC400 High Temperature circulator up to 400°C
2002 Unichiller extremely compact and powerful chillers with refrigeration power from 0,6kW to 100kW.
2002 Production of "CoolNet" stepper motor controlled expansion valves.
2003 Use of the Polystat controller featuring Plug & Play technology is extended to ALL Huber units except the Unistats.