DUAL-NE-1000X Continuous Infusion Syringe Pump System

DUAL-NE-1000X连续输液泵系统

Model: DUAL-NE-1000X

Eliminates Flow Rate Pauses & Drop-Offs

The DUAL-NE-1000X Continuous Pump System eliminates the problem of flow rate drop-offs and pauses found in Push-Pull syringe pump systems. With Push-Pull systems, one syringe infuses, while the other refills, then they switch directions. This switch of directions causes a delay in flow while the syringes are primed.

The DUAL-NE1000X Continuous Pump System solves the inconsistent flow rate problems of push-pull pumps.

How it works

The refilling syringe pump fills the syringe at a faster rate than the infusing syringe pump infuses, giving it time to prime the syringe after the syringe is filled, or even overlap the infusion to create a seamless transition between syringes.

The smoothness of the transition between syringes can be fine tuned by adjusting the infusion rate, refill rate, priming rate, prime volume and overlap volume parameters.

Description

Two single syringe pumps, each pump holds 1 syringe up to 60 mL, or 140mL partially filled.

Infusion rates from 0.73 μL/hr (1 mL syringe) to 2100 mL/hr (60 mL syringe)

Includes all the advanced functions and programming features of the NE-1000 family

Download Brochure

Disposable, Glass, Stainless Steel Syringes and Plumbing Supplies are sold separately.

Dual Pump Plumbing Kit, (sold separately), complete the continuous system.

Easy-to-use keypad interface

Requirement

Two Pumps from the NE-1000X Series of syringe pumps (any 2 NE-1000 Series of syringe pumps with an X upgrade in each pump). Pumps can be different models. One dual pump cable (Model: CBL-DUAL-3).

Features of the DUAL-NE-1000X

Includes: 2 NE-1000X programmable single syringe pumps, synchronization cable kit and two power supplies.

Utilizes specialized dual pump synchronization cable kit to synchronize both pumps.

Flexibility for the pumps to perform either continuous flow, emulsification or independently at any time

Features of the NE-1000X Family of Syringe Pumps

Built for automation

Operates stand-alone or from a computer

Infusion and withdrawal

Set a single pumping rate and/or dispensing volume

Applications range from simple infusions to complex pumping programs

Programmable preset protocols

Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer

RS-232 and TTL logic control interfaces

Network, control, and monitor up to 100 pumps with one computer.

Gradient ramping of flow rates

Worldwide power supplies available

Motor stall detection

Non-volatile memory of all parameters and programming

Upgradable to 340 pumping phases program memory with the X2 Upgrade

Dispensing accuracy of +/-1%

Unlimited lifetime technical support'

Two year warranty

Example Flow Rates for the DUAL-NE-1000X

DUAL-NE-1000X,连续输液泵系统,Continuous Infusion Syringe Pump System