HI-1710微波泄漏检测仪具体模拟图形显示，数字报警设置，RS232接口连接计算机进行控制，打印机接口，模拟信号输出。通过RS232接口，在实验室可以探访到所有测试数据，实现半自动产品检测质量保证系统。峰值保持和清零按键使测量更加准确，重现性更好。
|
| HI-1710微波泄漏检测仪美***HOLADAY 特性： |
| 校准：2450MHz.在ISM（工业、科学及医疗设备）范围内 |
| 量程：4量程，分别为0-1, 0-2, 0-5, 0-10mW/cm2。 |
| 响应特性： F1 (慢速) –小于3秒 |
| F2 (快速) – 小于1秒 |
| 功率密度：2.0 W/cm2 (2000mW/cm2) |
| 输入功率:100-240V，0.8-0.4A（max.），50-60Hz |
| 保险丝：250V,1.0A,型号T (5 mmx20mm) |
| 输入控制： |
| Zero调零位-干燥开关关闭到零。 |
| RS-232-标准通信输入。 |
| 控制输出: |
| Alarm Output报警输出- 从背部面板连接（Alarm Output24V 1 Amp） |
| analog output模拟输出：从背部面板连接（analog output 4 VDC max. 1 mA max.）。 |
| RS-232 ：从背部面板连接（RS-232）标准通信输出。 |
| 环境: |
| 温度：15- 40℃ |
| 湿度: 5%-95%，无冷凝 |
| 尺寸：311x254x127mm |
| 探头：（HI2623） |
| 探头长度: 305mm |
| 电缆: 2.74米 |
| 运输重量:3.6 KG |
| | |
| | |
| HI-1710A Microwave Oven Survey Meter |
| The HI-1710A combines the proven ａnd reliable diode sensing technology of the Holaday Microwave Survey Meters with the digital processing techniques developed for automatic oven scanning. |
| Key Features |
| Analog bar graph |
| Auto-ranging |
| Digital Alarm Set |
| Optional Remote Zero |
| Removable Sensing Probe |
| RS-232 Interface |
| Serial Printer Output |
| Description |
| The RS232 interface allows easy adapting of the unit to computerized data acquisition in laboratory studies ａnd semi-automatic production test systems. Digital Peak-Hold ａnd Push Button Zeroing aid in improving testing productivity ａnd reducing errors. Digital filters, selected from the front panel, provide the “Fast” or “Slow” responses familiar to analog survey instrument users. Built in self-test sequences test meter performance at turn-on ａnd each time the meter is zeroed. Diagnostic functions accessed from the front panel give quick indications of meter status. |
| Product Testing |
| On power-up, the HI-1710A is automatically configured for normal production testing, relieving the operator of a complicated setup operation. Simply activating the Peak-Hold feature from the front panel ａnd adding a serial printer results in a formatted RF leakage report each time the ZERO key is pressed. With the Remote Zero Option, testing ａnd reporting are accomplished without reaching to touch the instrument or setting down the probe for even greater operator efficiency. The Remote Zero Chamber provides a location shielded from stray RF fields by simply inserting the probe. An optional alarm output contact transfer provides remote signaling capability (24 VAC, 1A). The separable probe/pre-amp assembly (HI-2623) means that daily ellipticity checks ａnd periodic calibration checks can be made without removing the instrument from service. Spare probes, available from Holaday, can be pre-checked for immediate exchange with no meter down time. Auto-ranging ａnd the bar graph display make it quicker ａnd easier for the operator to accurately perform oven leakage testing. |
| Laboratory Measurement |
| The HI-1710A is ideally suited for engineering studies with a 0-1Vdc analog output for chart recorders ａnd plotters. The remote control ａnd reading features allows use in many automated data acquisition configurations. |
| Standard Configuration |
| Digital Alarm Set |
| RS232 Interface for Computer Control |
| Electrical Specifications |
| Frequency：2450 MHz |
| Ranges：0-1, 0-2, 0-5, 0-10 mW/cm2 |
| Physical Specifications |
| Cable length：1.2 m (3.94 ft) |
| Probe Length：30 cm (11.81 inches) |
| Specifications |
| Power Supply：100 - 240 VAC 50/60 Hz |
沪公网安备31011502016460号
