CartiGen三维软骨组织块压力加载培养系统

CartiGen 体外三维软骨组织机械力刺激培养分析系统能够为生物反应器内的生多种细胞和组织生长提供压应力培养。培养室种类多样,单室可以容纳***个样本的直径 30 毫米 x 厚 5 毫米的组织样品。12 孔培养室可以容纳大小不超过 10 毫米直径 x 5 毫米厚的 12 个样品,培养室种类多。系统使用 40N 线型电机来监控/控制集成的负载细胞,提供各种波形,用户甚至可以自定义波形。

软骨构建三维力学刺激体外培养多舱生物反应器动态周期性压应力持续循环压力负荷周期性刺激诱导软骨分化组织工程
C9-X CartiGen生物反应器 
C9 - X系统被设计成***个多样品生物反应器系统,能够支持广泛的细胞和组织的生长实验。反应舱***多可容纳9个圆盘形样品,***大的直径8mm大小x 5mm厚。 C9 - X的独特的设计集成了内室底部多孔压板允许通过样本结构的灌注。此功能可让研究人员直接通过结构的流动,同时采用压缩力刺激。可选功能,如额外的机械传感器和灌注系统定制仪器的具体研究中的应用。 
生物反应器可为组织培养物提供不同大小和频率的压应变以及不同流量的灌流条件,可控精度高、操作简单可行、性能稳定

CartiGen三维软骨组织块压力加载培养系统

Chambers: Fabricated out of bioinert, autoclavable materials, the CartiGen bioreactor chambers apply

oscillatory compressive/tensile stimulation to disc shaped samples. The chambers can be used with a

variety of construct materials by choosing one of our many chamber options. Maximum sample size is 10 mm 

diam-eter by 5 mm thick, for a standard single sample chamber.

A custom silicone seal provides a mechanical feed-through

and maintains a sterile environment while allowing axial

motion with minimal resistance.

C10-1 Chamber:

Sample Size - 1

Maximum Diameter - 30mm

Maximum Thickness - 5mm

C10-12 Chamber:

Sample Size - 12

Maximum Diameter - 10mm

Maximum Thickness - 5mm

Unique design includes optical grade windows on the bot-

tom of the chamber for confocal viewing during culture.

C9-X Chamber:

Sample Size - 9

Maximum Diameter - 8mm

Maximum Thickness - 5mm

Minimum Thickness - 2mm

Unique design provides directed perfusion through each of

the samples during culture on a common flow loop

DynaGen ? Stimulator: The CartiGen bioreactor system

includes the TC20 tension/compression mechanical

stimulator. This 40 Newton linear motor is lightweight, compact,

corrosion resistant and compatible with most

standard incubators. The TC20 stimulator can be used with any

of the CartiGen bioreactor chambers.

Stimulator Specifications:

Height: 10.5 inches  Footprint: 5 inches by 7 inches

Weight: 5.5 pounds

GrowthWorks ? Control System: A fifth generation design, the

GrowthWorks ?  Software and control platform includes ad-

vanced capabilities, such as multiple waveform control, data

aquisition and multi-motor operation. The intuitive software

runs on a laptop computer under Windows XP and features a

simple user interface. User defined stimulation profiles are con-

trolled by the computer and readily monitored using graphic

displays. Integrated data aquisition routines capture and record

data at user prescribed intervals.

Featuring a 32 bit Intel based CPU and integrated motor drives,

the control hardware communicates with the laptop using a

network cable. GrowthWorks ? can be configured to run four

stimulators and monitor up to 8 transducers, allowing the re-

searcher to customize the system functionally. The controller

can be upgraded with additional modules for

applications requiring automation features or additional

axes of mechanical stimulation.

Straightforward and adaptable,

GrowthWorks ?  provides the ideal

control platform for mechanically

stimulated tissue growth.

CartiGen三维软骨组织块压力加载培养系统

系统简介:

CartiGen 体外三维软骨组织机械力刺激培养分析系统能够为生物反应器内的生多种细胞和组织生长提供压应力培养。培养室种类多样,单室可以容纳***个样本的直径 30 毫米 x 厚 5 毫米的组织样品。12 孔培养室可以容纳大小不超过 10 毫米直径 x 5 毫米厚的 12 个样品,培养室种类多。系统使用 40N 线型电机来监控/控制集成的负载细胞,提供各种波形,用户甚至可以自定义波形。

C9-X CartiGen生物反应器 

C9 - X系统被设计成***个多样品生物反应器系统,能够支持广泛的细胞和组织的生长实验。反应舱***多可容纳9个圆盘形样品,***大的直径8mm大小x 5mm厚。 C9 - X的独特的设计集成了内室底部多孔压板允许通过样本结构的灌注。此功能可让研究人员直接通过结构的流动,同时采用振动压刺激。可选功能,如额外的机械传感器和灌注系统定制仪器的具体研究中的应用

我们的产品有三维力学加载细胞组织培养系统、三维软骨力学刺激生物反应器、3D血管搏动培养系统、3d肌腱韧带力学培养生物反应器、3d心脏瓣膜培养系统、三维骨应力刺激生物反应器、三维皮肤力学机械刺激生物反应器、3D灌注培养生物反应器、3d支架培养系统、多样品三维力学加载细胞组织培养系统。