MERIT-G(GP)光栅调谐型(超脉冲)二氧化碳激光器
价 格:询价
产 地:更新时间:2020-10-28 11:00
品 牌:Access Laser型 号:MERIT-G(GP)
状 态:正常点击量:2680
400-006-7520
联系我时,请说明是在上海非利加实业有限公司上看到的,谢谢!
联 系 人:
上海非利加实业有限公司
电 话:
400-006-7520
传 真:
400-006-7520
配送方式:
上海自提或三方快递
联系我时请说在上海非利加实业有限公司上看到的,谢谢!
功率: 在***强谱线处连续功率2W(MERIT-GP,峰值功率8W)
波长: 9.2μm - 10.8μm
谱线数:50条以上(MERIT-GP,55条以上)
功率稳定度: ±5%典型值,对于***强谱线
激光模式: 近 TEM00, M2 < 1.2,光腰直径2.4mm,全发散角5.5mrad
尺寸: 406×104×71(mm)
冷却要求: 强制空冷
电源: 28VDC/5A(MERIT-GP,48VDC/4A)
可用选件:
固定单波长
闭环控制功率稳定性,±3%
水冷
冷板冷却
实时功率取样
同位素气体填充获得不同的波长范围
产品参数
GRATING TUNED CO2 LASER
SPECIFICATIONS*
Model Merit-G (standard) Merit-GP (Super pulsed)
Output Power 2 watt CW at the strongest line 6 watt peak at the strongest line (200 μs pulse
at 1 kHz)
Number of lines At least 50 At least 55
Power requirement 28 VDC, 7 amps 48 VDC, 4 amps
Range of wavelength: 9.2 μm to 10.8 μm.
Power stability: ±5% Typical for the strong lines
Laser mode: TEM00, M2 < 1.2; beam diameter at
exit: 2.4 mm; beam divergence angle: 5.5 mrad
Dimensions: 16” x 4.1” x 2.8”
Cooling requirement: forced air
Factory warranty: One year for parts and labor due to manufacturing quality
Options available:
• Single fixed wavelength (factory preset)
• Power stabilization with closed loop control, ±3%
• Water cooling
• Cold plate cooling
• Isotope gas fill for different wavelength range
∗ We strive to satisfy custom requirements. Please contact us if you have other special needs.
∗ Specifications subject to change without notice.
∗ Other tunable laser available at lower or higher power levels and different tuning ranges.