Dwyer球阀WE05-FMD01-A_WE05-GMD01-A

VALVE

Service: Compatible liquids and gases.

Body: 3-piece.

Line Sizes: 1/2 to 3?.

End Connections: Socket weld.

Pressure Limits: 20? Hg to 1000 psi (-0.7 to 69 bar) up to 250°F.

Wetted Materials: Body and ball: 316 SS (CF8M); Stem: 316 SS; Seat: RTFE/

PTFE; Seal, Washer, and Packing: PTFE.

Temperature Limits: -20 to 392°F (-29 to 200°C).

Other Materials: O-ring: Fluoroelastomer; Handle: 304 SS;

Washer: 301 SS; Stem Nut, Locking Device, Gland Ring: 304 SS; Handle

Sleeve: PVC.

Agency Approvals: Meets the technical requirements of EU Directive 2011/65/EU (RoHS II).

Dwyer球阀WE05-FMD01-A_WE05-GMD01-A

阀门

介质：兼容液体和气体。

主体：3件式。

线路尺寸：1/2”至3”。

端部连接：承插焊。

压力限制：20 Hg至1000 psi（-0.7至69巴）至250°F。

接液材质：阀体和阀球：316不锈钢（CF8M）；阀杆：316不锈钢；阀座：RTFE/

聚四氟乙烯；密封、垫圈和填料：聚四氟乙烯。

温度限制：-20至392°F（-29至200°C）。

其他材料：O型圈：氟橡胶；手柄：304不锈钢；

垫圈：301 SS；阀杆螺母，锁紧装置，压盖环：304不锈钢；手柄

套筒：PVC。

机构批准：符合欧盟指令2011/65/EU（RoHS II）的技术要求。

Dwyer球阀WE05-FMD01-A_WE05-GMD01-A

VALVE

Service: Compatible liquids and gases.

Body: 3-piece.

Line Sizes: 1/2 to 3?.

End Connections: Socket weld.

Pressure Limits: 20? Hg to 1000 psi (-0.7 to 69 bar) up to 250°F.

Wetted Materials: Body and ball: 316 SS (CF8M); Stem: 316 SS; Seat: RTFE/

PTFE; Seal, Washer, and Packing: PTFE.

Temperature Limits: -20 to 392°F (-29 to 200°C).

Other Materials: O-ring: Fluoroelastomer; Handle: 304 SS;

Washer: 301 SS; Stem Nut, Locking Device, Gland Ring: 304 SS; Handle

Sleeve: PVC.

Agency Approvals: Meets the technical requirements of EU Directive 2011/65/EU (RoHS II).

ACTUATORS

Pneumatic “DA” and “SR” Series

Type: DA series is double acting and SR series is spring return (rack and pinion).

Normal Supply Pressure: DA: 40 to 115

psi (2.7 to 7.9 bar); SR: 80 psi (5.5 bar).

Maximum Supply Pressure: 120 psi (8.6 bar).

Air Connections: DA01: 1/8? female

NPT; DA02 to DA05: 1/4? female NPT;

SR02 to SR07: 1/4? female NPT.

Housing Material: Anodized aluminum body and epoxy coated aluminum end caps.

Temperature Limits: -40 to 176°F (-40 to 80°C).

Accessory Mounting: NAMUR standard.

Electric “TD” and “MD” Series

Power Requirements: 110 VAC,

220 VAC, 24 VAC or 24 VDC (MD models not available in 24 VDC).

Power Consumption: See instruction manual.

Cycle Time (per 90°): TD01: 4 s; MD01: 10 s; TD02 and MD02: 20 s; TD03 and MD03: 30 s.