IP411-X15_IP411-020_IP413-X15_IP413-020电压气压传感器OMEGA

整体式刻度盘控制压力指示器

IP 413具有手动超控功能

电磁阀设计消除泄漏

可与未过滤的主送风***起使用

现场校准的零点和量程调整

IP411和IP413型接受4-20 mA、0-10 V和0-5 V信号，并将这些模拟信号转换为比例线性气动输出（3-15或0-20 psi）。与其他排气以保持压力的装置不同，IP411和IP413使用硅压力传感器和电空转换器来提供所需的气压，而无需持续的空气消耗。该转换器独特的设计消除了常见问题，如软管抖动和不必要的空气消耗，这些问题是由热、老化、水分、污染、安装、方向错误、粘性阀、阀门泄漏和堵塞引起的。IP411和IP413提供了将电信号转换为气压的可靠、可重复和准确的方法。

IP411-X15_IP411-020_IP413-X15_IP413-020电压气压传感器OMEGA

规格

电源电压：18至28 Vac或Vdc

电源电流：150 mA/3 VA

精度：1.0%fs

调零：±50%

跨度调整：±25%

工作温度：32至160°F（0至70°C）

补偿温度：32至160°F（0至70°C）

热效应：零：±0.025%fs/°F范围：±0.01%fs/°F

最大供应压力：40磅/平方英寸

最小供应压力：高于最大控制压力0.1 PSIG

电磁阀类型：浮动提升阀

电磁线圈：3瓦

流速：0.5 scfm

压力端口：软管倒钩配合3/16“ID管

最小控制压力油管长度：5英尺（1.5米）

电气接头：螺纹端子

重量：350克（12盎司）

管汇材质：铝

外壳：16号钢

IP411-X15_IP411-020_IP413-X15_IP413-020电压气压传感器OMEGA

Integral Dial Control Pressure Indicator

IP 413 has a Manual Override Feature

Solenoid Valve Design Eliminates Leaks

Can Be Used with Unfiltered Main Air Supply

Zero and Span Adjustments for Field Calibration

Models IP411 and IP413 accept 4-20 mA, 0-10 V and 0-5 V signals and convert these analog signals to proportional linear pneumatic outputs (3-15 or 0-20 psi). Unlike other units which bleed air to maintain pressure, the IP411 and IP413 use a silicon pressure sensor and an electropneumatic converter to provide the desired pneumatic pressure without constant air consumption. The converter’s unique design eliminates common problems such as hose chatter and needless air consumption from air leaks caused by heat, age, moisture, contamination, mounting, orientation error, sticky valves, valve leakage and blockages. The IP411 and IP413 provide a reliable, repeatable, and accurate means of converting an electrical signal into a pneumatic pressure.

SPECIFICATIONS

Supply Voltage: 18 to 28 Vac or Vdc

Supply Current: 150 mA/3 VA

Accuracy: 1.0% FS

Zero Adjustment: ±50%

Span Adjustment: ±25%

Operating Temp: 32 to 160°F (0 to 70°C) 

Compensated Temp: 32 to 160°F (0 to 70°C)

Thermal Effects: Zero: ±0.025%FS/°F Span: ±0.01%FS/°F

Max Supply Pressure: 40 psig

Min Supply Pressure:0.1 psig above maximum control pressure

Solenoid Type: Floating poppet 

Solenoid Coil: 3 watts

Flow Rate: 0.5 SCFM

Pressure Port: Hose barb fits 3/16" ID Tubing

Minimum Control Pressure Tubing Length: 5 ft (1.5 m)

Electrical Connector: Screw terminals

Weight: 350 grams (12 oz)

Manifold Material: Aluminum

Case: 16 gage steel