M12TX-PT100-1/4-9_M12TX-PT100-1/4-10_M12TX-PT100-1/4-12温度传感器OMEGA

可编程发送器

成型连接器（IP67）

M12连接

4至20 mA输出=0至150°C默认设置

-50至500°C（-58至932°F）全可编程范围

Programmable Transmitter

Molded Connector (IP67)

M12 Connection

4 to 20 mA Output = 0 to 150°C

Default Setting

-50 to 500°C (-58 to 932°F) Full Programmable Range

The M12TX 100Ω RTD sensor with built-in transmitter can be programmable by a computer. The configuration kit required for programming is M12TX-CONFIG. This unique probe is ideal for areas with space limitations where traditional head connections are too large to fit. The M12 thread design offers a secure industrial connection. The temperature Transmitter is designed with mineral insulated cable probe (MgO) which allows the probe to have a minimum bend radius of three times the diameter.

M12TX-PT100-1/4-9_M12TX-PT100-1/4-10_M12TX-PT100-1/4-12温度传感器OMEGA

Programmable Transmitter

Molded Connector (IP67)

M12 Connection

4 to 20 mA Output = 0 to 150°C Default Setting

-50 to 500°C (-58 to 932°F) Full Programmable Range

The M12TX 100Ω RTD sensor with built-in transmitter can be programmable by a computer. The configuration kit required for programming is M12TX-CONFIG. This unique probe is ideal for areas with space limitations where traditional head connections are too large to fit. The M12 thread design offers a secure industrial connection. The temperature Transmitter is designed with mineral insulated cable probe (MgO) which allows the probe to have a minimum bend radius of three times the diameter.

Specifications

Body: Thermoplastic material

Probe Type: Compact mineral insulated cable AISI 316L SS

Probe Minimum Bending Radius: Three-times the outer diameter [except the sensing tip which length is 30 mm (1.2")]

Connection: M12x1 male in accordance to VDE0627 (output connection)

Sensor: RTD Pt100 class A up to 300°C in accordance to IEC751

Range: -50 to 500°C (-58 to 932°F)

Tmax. Electronic: 80°C (176°F)

Sensor Break Monitoring:

    Selectable: Upscale (>21.0 mA) or downscale (<3.6 mA) action

    Sensor Short-Circuit: Fixed to downscale (<3.6 mA) action

Output

Signal: 4 to 20 mA

Permissible load: 700 @ 24 Vdc [RLo= (Vsupply-8.5)/0.020]

Response Time (90%):<50 ms

Isolation In-Out: Non-isolated

Power Supply: 8.5 to 32 Vdc (polarity protected)

Environment Conditions

Temperature: -40 to 80°C (-40 to 176°F) for plastic body

Relative Humidity: 0 to 100%

EMC: In accordance to EN 61326

Degree of Protection: IP65 and IP67 in accordance to IEC60529

Accuracy

Transmitter: Maximum of ±0.2°C or ±0.2% of span

Sensor: Class A in accordance to IEC751

Temperature Influence [Deviation from 20°C (68°F)]: Maximum of ±0.3°C/25°C (77°F) or ±0.3% of span/25°C (77°F)

Supply Voltage Influence: Negligible

Range Configurations: It is possible set the input temperature range (span) by the M12TX-CONFIG configuration kit (PC with OS Windows? required)

Zero Adjustments: Any value between -50 to 50°C

Minimum Span: 50°C (122°F) [if the zero value is set between one of these values: -40°C (-40°F), -20°C (-4°F), 0°C (32°F), 20°C (68°F), 40°C (104°F), the minimum span is 20°C (68°F) rather than 50°C (122°F)]

Sensor Error Compensation: Over 2 points (maximum 1% of span)

Factory Setting: 0 to 150°C/sensor break >21 mA (upscale)

Response Time: Diameter 3 mm<3.5 second, diameter 6 mm <13 second (test in water to IEC751- time for reaching 63.2% of instantaneous temperature change) three times the diameter.

M12TX-PT100-1/4-9_M12TX-PT100-1/4-10_M12TX-PT100-1/4-12温度传感器OMEGA

范围配置：可以通过m12tx-config配置工具包（需要配备OS Windows?的PC）设置输入温度范围（范围）。

零位调整：在-50到50°C之间的任何值

***小跨距：50°C（122°F）【如果零值设置在以下值之***之间：-40°C（-40°F）、-20°C（-4°F）、0°C（32°F）、20°C（68°F）、40°C（104°F），***小跨距为20°C（68°F）而不是50°C（122°F）】

传感器误差补偿：超过2点（***大跨度的1%）

出厂设置：0至150°C/传感器断开>21 mA（***）

响应时间：直径3 mm<3.5秒，直径6 mm<13秒（根据IEC751标准在水中试验-达到瞬时温度变化63.2%的时间）为直径的三倍。