PX633A5-003GI_015GI_100GI_250GI液位变送器OMEGA

PX633潜水式液位变送器是为满足***苛刻的液位测量条件而设计的。传感器采用先进的微处理器技术，具有全面的线性和温度误差补偿，保证了高精度的测量。

探头采用全密封、参考管冷凝对策、双重密封设计和坚固的不锈钢主体，以确保长期可靠性、性能和稳定性。信号发送模块具有瞬态电压保护，以确保在恶劣的浪涌电压环境下工作（浪涌保护不受保证，也不在保证范围内）。倒锥密封可延长电缆和传感器的使用寿命，在传感器可能受到湍流介质的严重应力的情况下。PX633潜水液位变送器是满足所有高要求液位测量应用的***佳选择。

PX633A5-003GI_015GI_100GI_250GI液位变送器OMEGA

Available with Accuracies of 0.5%, 0.25% and 0.1% of Full Scale

Designed for Complete Submergibility

Unique Cable Seal System Insures Water-Tight Integrity

High Static Accuracy and Repeatability

Fully Temperature Compensated

CE Certificate Included

100% Computer Tested, Calibrated and Serialized

Calibration Sheet Provided

Typical Applications:

            ?Well Monitoring

            ?Slug Tests

            ?Pump Control

            ?Groundwater Monitoring

            ?Soil Remediation

            ?Oceanographic Research

            ?Lift Stations

            ?Level Control

            ?Surface Water Monitoring

PX633 Submersible Level Transmitter is designed for dealing with the most demanding level measurement conditions. The sensor adopts advanced microprocessor technology with comprehensive linear and temperature error compensation assuring the high precision measurements.

The probe employs full potting, reference tube condensation countermeasures, a dual seal design, and a rugged stainless steel body to assure long term reliability, performance, and stability. The signal transmitting module has transient voltage protection to assure operation under the harsh surge voltage environments (surge protection is not guaranteed and is not covered by warranty). An inverted cone seal extends working life of cable and transducer in conditions were the sensor may experience severe stress from turbulent process media. PX633 Submersible level transmitter is the optimal choice to satisfy all of high demand level measuring applications.

Specifications

Accuracy: 20°C ± 5°C (68°F ± 9°)

      PX633A1: 0.01% FS NLHR

      PX633A2: 0.25% FS NLHR

      PX633A5: 0.50% FS NLHR

Long Term Stability: ±0.2% FS/ year

Ambient temperature effects (20°C to 80°C): ±0.2% FS/10K

Power Supply Effects: ± 0.005% FS/V (Zero and Span)

Load Effect: ± 0.05% FS/kΩ (Zero and Span)

Vibration Effects: IEC61298-3/GB/T 18271.3; 20g (5-2000HZ, max<±3mm)<0.1% FS

Supply Voltage (U): 10-30 VDC

Output Signal: 4 to 20mA DC

Load Resistance Ω: <(U-10)/0.021

Maximum Current: 20.8mA

Transmission Distance: < 1000m

Power Consumption: 500mW(20.8mA output @ 24VDC)

Operating Temperature: -10 to 70°C (14 to 158°F)

Storage Temperature: -30 to 80°C (- 22 to 176°F)

Protection Class: IP68

Electrical Connection: PUR cable, outer diameter (7.5±0.2)mm

Isolation Diaphragm Material: 316 SS

Fill Fluid: Silicon oil

Sensor Seal: O-ring, FMK

Side Cover Material / Diameter: 316 SS/ 28mm

EMC Environment:

      GB/T 9254/CISPR22

      GB/T 17626.2/IEC61000-4-2

      GB/T 17626.3/IEC61000-4-3

      GB/T 17626.8/IEC61000-4-8

      GB/T 17626.4/IEC61000-4-4

      GB/T 17626.5/IEC61000-4-5

      GB/T 17626.6/IEC61000-4-6

PX633A5-003GI_015GI_100GI_250GI液位变送器OMEGA

Available with Accuracies of 0.5%, 0.25% and 0.1% of Full Scale

Designed for Complete Submergibility

Unique Cable Seal System Insures Water-Tight Integrity

High Static Accuracy and Repeatability

Fully Temperature Compensated

CE Certificate Included

*** Computer Tested, Calibrated and Serialized

Calibration Sheet Provided

Typical Applications:

            ?Well Monitoring

            ?Slug Tests

            ?Pump Control

            ?Groundwater Monitoring

            ?Soil Remediation

            ?Oceanographic Research

            ?Lift Stations

            ?Level Control

            ?Surface Water Monitoring

PX633 Submersible Level Transmitter is designed for dealing with the most demanding level measurement conditions. The sensor adopts advanced microprocessor technology with comprehensive linear and temperature error compensation assuring the high precision measurements.

The probe employs full potting, reference tube condensation countermeasures, a dual seal design, and a rugged stainless steel body to assure long term reliability, performance, and stability. The signal transmitting module has transient voltage protection to assure operation under the harsh surge voltage environments (surge protection is not guaranteed and is not covered by warranty). An inverted cone seal extends working life of cable and transducer in conditions were the sensor may experience severe stress from turbulent process media. PX633 Submersible level transmitter is the optimal choice to satisfy all of high demand level measuring applications.