这种设计的温度计非常适合安装在水箱、锅炉顶部、高位置或其他难以读取标准角度仪表的区域。阀杆直径为1/4“。可提供长达36“的阀杆。通常在底部（6点钟）位置提供阀杆，特殊情况下，这些温度计可以在阀杆伸出左侧（9点钟）、顶部（12点钟）或右侧（3点钟）位置进行设置。如果未指定，将提供标准底部（6点钟）位置。

XR-0-250F-20-120C-6-PLAIN_XR-0-400C-18-1/2温度计OMEGA

Made Entirely of Stainless Steel

Hermetically Sealed

Model X and XR:3Inch O.D. Head

Model V and VR:5Inch O.D. Head

Model XR and VR Feature Reset Screw

Thermometers of this design are well adapted to installation on top of tanks, boilers, in high locations or other areas where it would be difficult to read a standard angle-form instrument.

Normally supplied with the stem at the BOTTOM (6 o’clock) position, on special order, these thermometers can be set with the stem protruding at the LEFT (9 o’clock), TOP (12 o’clock) or RIGHT (3 o’clock) positions. If not specified, the standard BOTTOM (6 o’clock) position will be supplied

XR-0-250F-20-120C-6-PLAIN_XR-0-400C-18-1/2温度计OMEGA

1.Made Entirely of Stainless Steel

2.Hermetically Sealed

3.Model X and XR: 3 Inch O.D. Head

4.Model V and VR: 5 Inch O.D. Head

5.Model XR and VR Feature Reset Screw

这种设计的温度计非常适合安装在水箱、锅炉顶部、高位置或其他难以读取标准角度仪表的区域。

阀杆直径为1/4“。可提供长达36“的阀杆。

通常在底部（6点钟）位置提供阀杆，特殊情况下，这些温度计可以在阀杆伸出左侧（9点钟）、顶部（12点钟）或右侧（3点钟）位置进行设置。如果未指定，将提供标准底部（6点钟）位置.