美***Glas-Col PL624温度控制器（程序控温）（现货）

Controls--DIGITROL II

   The DigiTrol II uses a microprocessor-based,user-selectable control mode temperature control. The control features a digital dual output display for set point and process temperature indication. The automatic-tuning feature ensures increased temperature accuracy with minimum overshoot. Easy set-up and simple input commands make this control very “user friendly.” The load and the thermocouple receptacles are located on the front panel for easy accessibility.
   Features automatic cold junction compensation and thermocouple break protection.Furnished with an immersion thermocouple with 6"-long stainless steel probe.
Specifications Electrical: Lighted on/off power switch with auxiliary LED indication, fuse protection,3-wire load receptacle, and 3-wire line cord with molded plug.
Control Type: PID parameters with auto/manual mode option. Accuracy: 0.1% of span. Display: Dual, 4-digit LED.  
user selectable.Lab Bench Case: Low profile cabinet,8"w x 6"d x 3-3/8"h.

美国Glas-Col PL624温度控制器（程序控温）（现货）

Our controls feature a digital dual output display for set point and process temperature indication. The automatic-tuning feature ensures increased temperature accuracy with minimum overshoot. Easy set-up and simple input commands make our controls very "user friendly". All the below controls have the following specifications:

Accuracy: 0.1% of span, +/- 1.0°C

Calibration: Co or F° user selectable

Display: LED Process/Setpoint

Resolution: 1°, 1.0° or 1.00°

Control: PID with Auto-tune algorithm,

Solid state relay

Environment 0 to 149 oF / -18 to 65 oC; 0 to 90% RH, non-condensing

美***Glas-Col PL624温度控制器（程序控温）（现货）

Controls--DIGITROL II

   The DigiTrol II uses a microprocessor-based,user-selectable control mode temperature control. The control features a digital dual output display for set point and process temperature indication. The automatic-tuning feature ensures increased temperature accuracy with minimum overshoot. Easy set-up and simple input commands make this control very “user friendly.” The load and the thermocouple receptacles are located on the front panel for easy accessibility.
   Features automatic cold junction compensation and thermocouple break protection.Furnished with an immersion thermocouple with 6"-long stainless steel probe.
Specifications Electrical: Lighted on/off power switch with auxiliary LED indication, fuse protection,3-wire load receptacle, and 3-wire line cord with molded plug.
Control Type: PID parameters with auto/manual mode option. Accuracy: 0.1% of span. Display: Dual, 4-digit LED. Set Point: Up/down keys. °F or °C display,
user selectable.Lab Bench Case: Low profile cabinet,8"w x 6"d x 3-3/8"h.