FLDA3405ST_FLDA3406C_FLDA3407G_FLDA3408ST_FLDA3409ST转子流量计OMEGA
FLD series rotor flowmeter is a kind of precision instrument, which is specially used to read the flow directly. They embody the simple, universal and economical characteristics inherent in the classical rotor flowmeter. It is very suitable for measuring carrier gas, indicating and controlling the gas in the process of processing in the chromatographic separation method. It is also very suitable for gas measurement in laboratories and experimental factories, as well as flow and liquid level indication. When fully assembled and shipped, these flowmeters include standard fittings (available in a variety of materials), side panels, thicker front enlargement shields and back panels, as well as built-in control valves and flow pipes. Using the selected acrylic triangle frame FLTR-1, the panel mounting mode can be transformed into the bracket mounting mode. The trigonometer is equipped with a level gauge and a leveling screw.

FLDA3405ST_FLDA3406C_FLDA3407G_FLDA3408ST_FLDA3409ST转子流量计OMEGA

Standard Accuracy: Full Range (+5%)

Repeatability: +0.25%

Available Flow Range: Minimum 10:1

Maximum working pressure: 200 psig/13.8 bars

Maximum operating temperature: 121 C (250 F)

Texture of material

Flow tube: thick-walled borosilicate glass

Float: glass, sapphire, 316 stainless steel, tungsten cobalt carbide and tantalum contact with liquid installation joint selection: black anodic alumina or 316 stainless steel

Side panel: black anodic alumina

Frontal shield: polycarbonate resin with lenses for lengthwise magnification to enhance reading resolution

Back: 1_8"Thick White Acrylic Resin

O-rings and fillers: Sodium butadiene rubber O-rings are used in aluminium/copper flowmeters. Fluorine Rubber O-Ring Used in Stainless Steel Flowmeter

Selection: Perfluororubber and EPR

Connection Port: 1_8 NPT Internal Thread Inlet and Outlet Connection Port

FLDA3405ST_FLDA3406C_FLDA3407G_FLDA3408ST_FLDA3409ST转子流量计OMEGA

标准精度：满量程的±5%

重复性：±0.25%

可用流量范围：***小为10:1

***大工作压力：200 psig/13.8 bars

***高工作温度：121°C (250°F)

材质

流量管：厚壁硼硅酸盐玻璃

浮子：玻璃、红蓝宝石、316不锈钢、钨钴硬质合金和钽与液体接触的安装接头的选择：黑色阳极氧化铝或316不锈钢

侧面板：黑色阳极氧化铝

正面防护罩：带有纵向放大透镜的聚碳酸酯树脂，可增强读数分辨率

背板：1?8”厚白色丙烯酸树脂

O形圈和填料：铝质／铜质流量计中采用丁钠橡胶O形圈。不锈钢流量计中采用氟橡胶O形圈

选配：全氟橡胶和EPR

连接口：1?8 NPT内螺纹入口和出口连接口