FL-1211经济型净化转子流量计美***OMEGA欧米茄

±10%满刻度精度

±1/2%满刻度重复性

***体式针阀

侧板结构

直读式空气和水秤

316不锈钢和黄铜结构可用

压力系统用屏蔽

易于读取的65毫米（2.6英寸）刻度

FL-1211经济型净化转子流量计美国OMEGA欧米茄

规格

规模

长度：65 mm（2.6“）

刻度：以gpm水或scfm空气直接读数

施工

计量管：硼硅酸盐玻璃

浮子：316不锈钢

浮动止动块：不锈钢端部配件和管固定适配器：镀铬黄铜，316不锈钢

侧板：镀铬黄铜

包装材料：O型圈：黄铜丁腈橡胶，不锈钢FKM

包装：黄铜氯丁橡胶，不锈钢FKM

评级

压力：最大13.8巴（200磅/平方英寸）

温度：最高121°C（250°F）。低于0°C（32°F）的流体温度将导致玻璃计量管结霜。

连接：水平内螺纹，3/8 NPT

精度：±10%满刻度

重复性：0.5%满刻度

尺寸：214 H x 38 W x 116 mm D（8.44 x 1.5 x 4.56“）

FL-1211经济型净化转子流量计美***OMEGA欧米茄

±10% Full Scale Accuracy

± 1/2% Full Scale Repeatability

Integral Needle Control Valve

Side Plate Construction

Direct Reading Air and Water Scales

316 SS and Brass Construction Available

Shielded for Use in Pressurized Systems

Easy-to-Read 65 mm (2.6") Scale

The FL-1200 series has been discontinued. Please see the FLD100 Series as a possible alternative or contact our Flow Engineering department.

The FL-1200 flowmeters provide a low-cost means of flow rate indication. They are designed for applications where precise accuracy requirements for metering are not imperative. These meters are ideal for flow measurement applications of: purge service, sealed oil systems, bearing lubrication, cooling water indication and other associated applications.

SPECIFICATIONS

SCALES

Length: 65 mm (2.6")

Graduations: Direct reading in GPM water or SCFM air

CONSTRUCTION

Metering Tube: Borosilicate glass

Float: 316 stainless steel

Float Stops: stainless steel End Fittings and Tube Retaining Adaptor: Chrome-plated brass, 316 stainless steel

Side Plates: Chrome-plated brass

Packing Material: O-rings: Buna with Brass, FKM with stainless steel

Packing: Neoprene with brass, FKM with stainless steel

RATINGS

Pressure: 13.8 bar (200 psig) maximum

Temperature: 121°C (250°F) maximum. Fluid temperatures below 0°C (32°F) will cause frosting of the glass metering tube.

Connections: Horizontal female, 3/8 NPT

Accuracy: ±10% full scale

Repeatability: 0.5% full scale

Dimensions: 214 H x 38 W x 116 mm D (8.44 x 1.5 x 4.56")