FLSW3410ST-A_FLSW3411G-A_FLSW3412ST-A_FLSW3413T-A转子流量计OMEGA

HIGH or LOW Alarms

Compact Design

Liquid or Gas Applications

High or Low Flow Cutoff Applications

Dip Switch Configurable Buzzer, Relay, and LED

FLSW3410ST-A_FLSW3411G-A_FLSW3412ST-A_FLSW3413T-A转子流量计OMEGA

Accuracy: ±2% of full scale

Repeatability: 0.5% of full scale

Ambient Temperature: 0 to 70°C (32 to 158°F)

Maximum Pressure: 200 psig

Connections: 1/8" FNPT

End Blocks: Aluminum or 316 Stainless Steel

Elastomers: Buna & FKM (Aluminum), FKM (316SS)

Tube: Borosilicate

Floats:Glass or 316 Stainless Steel or Tantalum

Input Power: 12 Vdc, 15 Vdc maximum, 250 mA regulated, peak to peak maximum 100 mV

Power Consumption: Less than 200 mA

Response Time: 500 milliseconds

Source of Light: 65 nm, red LED

Light Immunity: Pulse modulated

Dry Contact Closures: 2 normally open, and normally closed relays 91A, 30 Vdc max.)

Alarm Options: High, Low or High/Low

Buzzer: User configurable, momentary or latch through DIP switch setting

Reset: Reset button or remote through “D”-through “D”- connector, to disable relay or buzzer

Interface: 9-pin “D”-connector

Optional: 12 Vdc power supply, tripod base

Dimensions:

Alarm Electronics Enclosure: 51.1 x 76.2 mm (2.01 x 3.00")

Enclosure #2 with Phone Plug: 30.5 x 14.2 mm (1.2 x 0.6")

DIP开关位于9针D接头的旁边。为了激活报警传感器，相应的开关必须处于DIP开关上的“打开”位置。继电器输出、蜂鸣器或绿色LED可单独设置为瞬时或锁定操作。例如，如果DIP开关SW1设置为“开”，当左侧传感器激活时，继电器和绿色LED将在锁存模式下通电。在按下重置按钮或应用外部重置TTL信号之前，它将保持锁定状态。