FLMG-38022BR_FLMG-38022SS_FLMG-38050AL_FLMG-38050BR流量计OMEGA

监测大多数气动或压缩气体系统

100 psi下1至900 scfm的流速

高压：黄铜或铝为600 psi，不锈钢为1000 psi

高温至116°C（240°F）标准，204或316°C（400或600°F）可选

安装在任何位置

继电器报警和模拟输出可选

双SCFM和SLPS秤

FLMG流量计结构坚固，安装方便，可直接读取空气流量。该装置在100磅/平方英寸压力下校准，适用于大多数压缩气动应用。

FLMG-38022BR_FLMG-38022SS_FLMG-38050AL_FLMG-38050BR流量计OMEGA

SPECIFICATIONS

Measuring Accuracy: ±4% FS over the entire scale range

Repeatability: ±1% FS

Flow Measuring Range: 1.2 to 900 SCFM

Maximum Operating Pressure:

Aluminum and Brass Monitors: 40 bar (600 psig)

Stainless Steel Monitors: 70 bar (1000 psig) up to 116°C (240°F)

Maximum Operating Temperature: 116°C (240°F)

Note: For options “-HT” and “-UHT”, see high-temperature graph on spec sheet

Pressure Differential: See the pressure graphs on spec sheet.

Standard Calibration Fluids: Air @ 21°C (70°F), 1.0 sg and 6.8 bar (100 psig)

Relay (Optional): 1 or 2 form “C” relays, rated 10 A, 125 or 250 Vac or ? A, 250 Vdc

Mechanical Life: >106 cycles

Analog Output (Optional): Supply voltage 12 to 35 Vdc, field selectable for 0 to 5 Vdc (100 W minimum load), 0 to 2000 Hz square-wave pulse or 4 to 20 mA

Rmax = 50 (Vs - 12)

(Vs = supply voltage DC)

Installation Dimensions: 

1/4 and 1/2 NPT Sizes: 1-7/8 OD x 6-9/16" length

3/4 and 1 NPT Sizes: 2-3/8 OD x 7-5/32" length

1-1/4 and 1-1/2 NPT Sizes: 3-1/2 OD x 10-1/8" length

FLMG-38022BR_FLMG-38022SS_FLMG-38050AL_FLMG-38050BR流量计OMEGA

弹簧和活塞式总成使这些流量计能够安装在任何位置。具有可选模拟输出（-ma）的FLMG模型通常用于将与流量成比例的信号传输到过程控制器、PLC、记录器或面板安装显示器。使用-ma选项，用户可以通过连接适当的管脚在读取0至2000赫兹方波脉冲、0至5伏直流模拟信号或2线4至20毫安模拟信号之间进行选择。